Kaydet (Commit) 9c9e0db4 authored tarafından Kohei Yoshida's avatar Kohei Yoshida

Copy & paste the *_Cell test code into *_Header test code.

I still need to rewrite it to make it the header test.

Change-Id: I0f8c469d51340ae72cb61696a22ebcbdcf84ffa6
üst 8600f21b
......@@ -28,13 +28,13 @@
# instead of those above.
#*************************************************************************
$(eval $(call gb_CppunitTest_CppunitTest,sc_editfieldobj))
$(eval $(call gb_CppunitTest_CppunitTest,sc_editfieldobj_cell))
$(eval $(call gb_CppunitTest_add_exception_objects,sc_editfieldobj, \
$(eval $(call gb_CppunitTest_add_exception_objects,sc_editfieldobj_cell, \
sc/qa/extras/sceditfieldobj-cell \
))
$(eval $(call gb_CppunitTest_use_libraries,sc_editfieldobj, \
$(eval $(call gb_CppunitTest_use_libraries,sc_editfieldobj_cell, \
avmedia \
basegfx \
comphelper \
......@@ -72,20 +72,20 @@ $(eval $(call gb_CppunitTest_use_libraries,sc_editfieldobj, \
$(gb_STDLIBS) \
))
$(eval $(call gb_CppunitTest_set_include,sc_editfieldobj,\
$(eval $(call gb_CppunitTest_set_include,sc_editfieldobj_cell,\
-I$(SRCDIR)/sc/source/ui/inc \
-I$(SRCDIR)/sc/inc \
$$(INCLUDE) \
))
$(eval $(call gb_CppunitTest_use_api,sc_editfieldobj,\
$(eval $(call gb_CppunitTest_use_api,sc_editfieldobj_cell,\
offapi \
udkapi \
))
$(eval $(call gb_CppunitTest_use_ure,sc_editfieldobj))
$(eval $(call gb_CppunitTest_use_ure,sc_editfieldobj_cell))
$(eval $(call gb_CppunitTest_use_components,sc_editfieldobj,\
$(eval $(call gb_CppunitTest_use_components,sc_editfieldobj_cell,\
basic/util/sb \
comphelper/util/comphelp \
configmgr/source/configmgr \
......@@ -118,17 +118,17 @@ $(eval $(call gb_CppunitTest_use_components,sc_editfieldobj,\
unoxml/source/service/unoxml \
))
$(eval $(call gb_CppunitTest_use_configuration,sc_editfieldobj))
$(eval $(call gb_CppunitTest_use_configuration,sc_editfieldobj_cell))
$(eval $(call gb_CppunitTest_use_filter_configuration,sc_editfieldobj))
$(eval $(call gb_CppunitTest_use_filter_configuration,sc_editfieldobj_cell))
$(eval $(call gb_CppunitTest_use_extra_configuration,sc_editfieldobj,\
$(eval $(call gb_CppunitTest_use_extra_configuration,sc_editfieldobj_cell,\
$(OUTDIR)/unittest/registry \
))
# we need to
# - explicitly depend on the sc resource files needed at unit-test runtime
$(call gb_CppunitTest_get_target,sc_editfieldobj) : \
$(call gb_CppunitTest_get_target,sc_editfieldobj_cell) : \
$(WORKDIR)/AllLangRes/sc \
# vim: set noet sw=4 ts=4:
# -*- Mode: makefile-gmake; tab-width: 4; indent-tabs-mode: t -*-
#*************************************************************************
# Version: MPL 1.1 / GPLv3+ / LGPLv3+
#
# The contents of this file are subject to the Mozilla Public License Version
# 1.1 (the "License"); you may not use this file except in compliance with
# the License or as specified alternatively below. You may obtain a copy of
# the License at http://www.mozilla.org/MPL/
#
# Software distributed under the License is distributed on an "AS IS" basis,
# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
# for the specific language governing rights and limitations under the
# License.
#
# The Initial Developer of the Original Code is
# Kohei Yoshida <kohei.yoshida@suse.com>
# Portions created by the Initial Developer are Copyright (C) 2011 the
# Initial Developer. All Rights Reserved.
#
# Major Contributor(s):
#
# For minor contributions see the git repository.
#
# Alternatively, the contents of this file may be used under the terms of
# either the GNU General Public License Version 3 or later (the "GPLv3+"), or
# the GNU Lesser General Public License Version 3 or later (the "LGPLv3+"),
# in which case the provisions of the GPLv3+ or the LGPLv3+ are applicable
# instead of those above.
#*************************************************************************
$(eval $(call gb_CppunitTest_CppunitTest,sc_editfieldobj_header))
$(eval $(call gb_CppunitTest_add_exception_objects,sc_editfieldobj_header, \
sc/qa/extras/sceditfieldobj-header \
))
$(eval $(call gb_CppunitTest_use_libraries,sc_editfieldobj_header, \
avmedia \
basegfx \
comphelper \
cppu \
cppuhelper \
drawinglayer \
editeng \
fileacc \
for \
forui \
i18nisolang1 \
msfilter \
oox \
sal \
salhelper \
sax \
sb \
sc \
sfx \
sot \
svl \
svt \
svx \
svxcore \
test \
tl \
tk \
subsequenttest \
ucbhelper \
unotest \
utl \
vbahelper \
vcl \
xo \
$(gb_STDLIBS) \
))
$(eval $(call gb_CppunitTest_set_include,sc_editfieldobj_header,\
-I$(SRCDIR)/sc/source/ui/inc \
-I$(SRCDIR)/sc/inc \
$$(INCLUDE) \
))
$(eval $(call gb_CppunitTest_use_api,sc_editfieldobj_header,\
offapi \
udkapi \
))
$(eval $(call gb_CppunitTest_use_ure,sc_editfieldobj_header))
$(eval $(call gb_CppunitTest_use_components,sc_editfieldobj_header,\
basic/util/sb \
comphelper/util/comphelp \
configmgr/source/configmgr \
dbaccess/util/dba \
fileaccess/source/fileacc \
filter/source/config/cache/filterconfig1 \
forms/util/frm \
framework/util/fwk \
i18npool/util/i18npool \
oox/util/oox \
package/source/xstor/xstor \
package/util/package2 \
sax/source/expatwrap/expwrap \
sax/source/fastparser/fastsax \
sc/util/sc \
sc/util/scd \
sc/util/scfilt \
sc/util/vbaobj \
scripting/source/basprov/basprov \
scripting/util/scriptframe \
sfx2/util/sfx \
sot/util/sot \
svl/source/fsstor/fsstorage \
toolkit/util/tk \
ucb/source/core/ucb1 \
ucb/source/ucp/file/ucpfile1 \
ucb/source/ucp/tdoc/ucptdoc1 \
unotools/util/utl \
unoxml/source/rdf/unordf \
unoxml/source/service/unoxml \
))
$(eval $(call gb_CppunitTest_use_configuration,sc_editfieldobj_header))
$(eval $(call gb_CppunitTest_use_filter_configuration,sc_editfieldobj_header))
$(eval $(call gb_CppunitTest_use_extra_configuration,sc_editfieldobj_header,\
$(OUTDIR)/unittest/registry \
))
# we need to
# - explicitly depend on the sc resource files needed at unit-test runtime
$(call gb_CppunitTest_get_target,sc_editfieldobj_header) : \
$(WORKDIR)/AllLangRes/sc \
# vim: set noet sw=4 ts=4:
......@@ -64,7 +64,8 @@ $(eval $(call gb_Module_add_subsequentcheck_targets,sc,\
CppunitTest_sc_namedrangesobj \
CppunitTest_sc_tablesheetobj \
CppunitTest_sc_tablesheetsobj \
CppunitTest_sc_editfieldobj \
CppunitTest_sc_editfieldobj_cell \
CppunitTest_sc_editfieldobj_header \
))
# vim: set noet sw=4 ts=4:
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* Version: MPL 1.1 / GPLv3+ / LGPLv3+
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License or as specified alternatively below. You may obtain a copy of
* the License at http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* Major Contributor(s):
* Copyright (C) 2012 Kohei Yoshida <kohei.yoshida@suse.com>
*
* All Rights Reserved.
*
* For minor contributions see the git repository.
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 3 or later (the "GPLv3+"), or
* the GNU Lesser General Public License Version 3 or later (the "LGPLv3+"),
* in which case the provisions of the GPLv3+ or the LGPLv3+ are applicable
* instead of those above.
*/
#include <test/unoapi_test.hxx>
#include <test/text/xtextfield.hxx>
#include <test/text/xtextcontent.hxx>
#include <com/sun/star/beans/XPropertySet.hpp>
#include <com/sun/star/container/XEnumerationAccess.hpp>
#include <com/sun/star/text/XText.hpp>
#include <com/sun/star/text/XTextField.hpp>
#include <com/sun/star/text/XTextFieldsSupplier.hpp>
#include <com/sun/star/sheet/XSpreadsheetDocument.hpp>
#include <com/sun/star/sheet/XSpreadsheet.hpp>
#define NUMBER_OF_TESTS 3
namespace sc_apitest {
class ScEditFieldObj_Header : public UnoApiTest, apitest::XTextField, apitest::XTextContent
{
public:
ScEditFieldObj_Header();
virtual void setUp();
virtual void tearDown();
virtual uno::Reference<uno::XInterface> init();
virtual uno::Reference<text::XTextContent> getTextContent();
virtual uno::Reference<text::XTextRange> getTextRange();
virtual bool isAttachSupported() { return true; }
CPPUNIT_TEST_SUITE(ScEditFieldObj_Header);
// XTextField
CPPUNIT_TEST(testGetPresentation);
// XTextContent
CPPUNIT_TEST(testGetAnchor);
CPPUNIT_TEST(testAttach);
CPPUNIT_TEST_SUITE_END();
private:
static sal_Int32 nTest;
static uno::Reference<lang::XComponent> mxComponent;
static uno::Reference<text::XTextField> mxField;
};
sal_Int32 ScEditFieldObj_Header::nTest = 0;
uno::Reference<lang::XComponent> ScEditFieldObj_Header::mxComponent;
uno::Reference<text::XTextField> ScEditFieldObj_Header::mxField;
ScEditFieldObj_Header::ScEditFieldObj_Header() {}
void ScEditFieldObj_Header::setUp()
{
++nTest;
UnoApiTest::setUp();
}
void ScEditFieldObj_Header::tearDown()
{
if (nTest == NUMBER_OF_TESTS)
closeDocument(mxComponent);
UnoApiTest::tearDown();
}
namespace {
uno::Reference<text::XTextField> getNewField(const uno::Reference<lang::XMultiServiceFactory>& xSM)
{
uno::Reference<text::XTextField> xField(
xSM->createInstance("com.sun.star.text.TextField.URL"), UNO_QUERY_THROW);
uno::Reference<beans::XPropertySet> xPropSet(xField, UNO_QUERY_THROW);
xPropSet->setPropertyValue("Representation", uno::makeAny(rtl::OUString("LibreOffice")));
xPropSet->setPropertyValue("URL", uno::makeAny(rtl::OUString("http://www.libreoffice.org/")));
return xField;
}
}
uno::Reference<uno::XInterface> ScEditFieldObj_Header::init()
{
// Return a field that's already in the cell.
if (!mxField.is())
{
if (!mxComponent.is())
// Load an empty document.
mxComponent = loadFromDesktop("private:factory/scalc");
uno::Reference<lang::XMultiServiceFactory> xSM(mxComponent, UNO_QUERY_THROW);
// Create a new URL field object, and populate it with name and URL.
mxField = getNewField(xSM);
// Insert this field into a cell.
uno::Reference<sheet::XSpreadsheetDocument> xDoc(mxComponent, UNO_QUERY_THROW);
uno::Reference<container::XIndexAccess> xIA(xDoc->getSheets(), UNO_QUERY_THROW);
uno::Reference<sheet::XSpreadsheet> xSheet(xIA->getByIndex(0), UNO_QUERY_THROW);
// Use cell A1 for this.
uno::Reference<table::XCell> xCell = xSheet->getCellByPosition(0, 0);
uno::Reference<text::XText> xText(xCell, UNO_QUERY_THROW);
uno::Reference<text::XTextCursor> xCursor = xText->createTextCursor();
uno::Reference<text::XTextRange> xRange(xCursor, UNO_QUERY_THROW);
uno::Reference<text::XTextContent> xContent(mxField, UNO_QUERY_THROW);
xText->insertTextContent(xRange, xContent, sal_False);
}
return mxField;
}
uno::Reference<text::XTextContent> ScEditFieldObj_Header::getTextContent()
{
// Return a field object that's not yet inserted.
uno::Reference<lang::XMultiServiceFactory> xSM(mxComponent, UNO_QUERY_THROW);
return uno::Reference<text::XTextContent>(getNewField(xSM), UNO_QUERY_THROW);
}
uno::Reference<text::XTextRange> ScEditFieldObj_Header::getTextRange()
{
// Use cell A2 for this.
uno::Reference<sheet::XSpreadsheetDocument> xDoc(mxComponent, UNO_QUERY_THROW);
uno::Reference<container::XIndexAccess> xIA(xDoc->getSheets(), UNO_QUERY_THROW);
uno::Reference<sheet::XSpreadsheet> xSheet(xIA->getByIndex(0), UNO_QUERY_THROW);
uno::Reference<table::XCell> xCell = xSheet->getCellByPosition(0, 1);
uno::Reference<text::XText> xText(xCell, UNO_QUERY_THROW);
uno::Reference<text::XTextCursor> xCursor = xText->createTextCursor();
uno::Reference<text::XTextRange> xRange(xCursor, UNO_QUERY_THROW);
return xRange;
}
CPPUNIT_TEST_SUITE_REGISTRATION(ScEditFieldObj_Header);
CPPUNIT_PLUGIN_IMPLEMENT();
}
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment