Skip to content

C
cpython
Kaydet (Commit) e4c6131b authored tarafından Guido van Rossum's avatar Guido van Rossum
Dosyalara gözat
Seçenekler

crypt module (Steve M's)

üst 7a325c38
Hide whitespace changes
Inline Side-by-side
Showing with 37 additions and 320 deletions
Modules/Setup.guido deleted 100644 → 0
Dosyayı görüntüle @ 7a325c38
# Each line in this file describes one or more optional modules.
# Comment out lines to suppress modules.
# Lines have the following structure:
#
# <module> ... [<objectfile> ...] [<cpparg> ...] [<library> ...]
#
# <objectfile> is anything ending in .o
# <cpparg> is anything starting with -I, -D, -U or -C
# <library> is anything ending in .a or beginning with -l or -L
# <module> is anything else but should be a valid Python
# identifier (letters, digits, underscores, beginning with non-digit)
#
# Lines can also have the form
#
# <name> = <value>
#
# which defines a Make variable definition inserted into Makefile.in
#
# NOTE: As a standard policy, as many modules as can be supported by a
# platform should be present. The distribution comes with all modules
# enabled that are supported by most platforms and don't require you
# to ftp sources from elsewhere. To make this easier for SGI
# platforms, you can copy Setup.sgi to Setup (or edit Makefile.in.in
# to use Setup.sgi instead of Setup).
# Some special rules to define PYTHONPATH
# Edit the definitions below to indicate which options you are using
# Don't edit this (usually)
DESTLIB=$(prefix)/lib/python
# Standard enabled (tests are always available)
TESTPATH=:$(DESTLIB)/test
# Enable this for SGI systems
ARCHPATH=:$(DESTLIB)/sgi
# Enable this for Sun systems
#ARCHPATH=:$(DESTLIB)/sun4
# Enable this if stdwin installed
STDWINPATH=:$(DESTLIB)/stdwin
PYTHONPATH=.:$(DESTLIB)$(TESTPATH)$(ARCHPATH)$(STDWINPATH)
# Modules that should always be present (non UNIX dependent)
array arraymodule.o # array objects
math mathmodule.o # math library functions, e.g. sin()
parser parsermodule.o # raw interface to the Python parser
posix posixmodule.o # posix (UNIX) system calls
regex regexmodule.o regexpr.o # Regular expressions, GNU Emacs style
strop stropmodule.o # fast string operations implemented in C
struct structmodule.o # binary structure packing/unpacking
time timemodule.o # time operations and variables
# Modules with some UNIX dependencies -- on by default.
# Note that some UNIX versions still don't support all of these
# so you may have to comment them out before the build completes.
dbm dbmmodule.o # dbm(3) may require -ldbm or similar
fcntl fcntlmodule.o # fcntl(2) and ioctl(2)
nis nismodule.o # Sun yellow pages -- not everywhere
pwd grp pwdmodule.o # pwd(3) and grp(3)
select selectmodule.o # select(2); not on ancient System V
socket socketmodule.o # socket(2); not on ancient System V
# Multimedia modules -- on by default
# These represent audio samples or images as strings
audioop audioopmodule.o # Operations on audio samples
imageop imageopmodule.o # Operations on images
rgbimg rgbimgmodule.o # Read SGI RGB image files (but coded portably)
# The stdwin module provides a simple, portable (between X11 and Mac)
# windowing interface. You need to ftp the STDWIN library, e.g. from
# ftp://ftp.cwi.nl/pub/stdwin. The STDWIN variable must point to the
# STDWIN toplevel directory. The ARCH variable must be set to the
# architecture identifier used to build STDWIN. NB if you combine this
# with the gl module on an SGI machine, you should replace "-lX11" with
# "-lX11_s".
STDWIN=/ufs/guido/src/stdwin
ARCH=sgi
stdwin stdwinmodule.o -I$(STDWIN)/H $(STDWIN)/Build/$(ARCH)/x11/lib/lib.a -lX11_s
# The md5 module implements the RSA Data Security, Inc. MD5
# Message-Digest Algorithm, described in RFC 1321. The necessary files
# md5c.c and md5.h are included here.
md5 md5module.o md5c.o
# The mpz module interfaces to the GNU Multiple Precision library.
# You need to ftp the GNU MP library. This was last tested with a
# somewhat modified (to get around bugs) version of GMP 1.2; it will
# likely need some work for more recent versions. The GMP variable
# must point to the GMP source directory.
GMP=/ufs/guido/src/gmp
mpz mpzmodule.o -I$(GMP) $(GMP)/libgmp.a
# The rotor module (contributed by Lance Ellinghouse) implements a
# rotor-based encryption algorithm. It is self-contained.
rotor rotormodule.o
# SGI IRIX specific modules -- off by default.
# Switch this on if you have an SGI machine.
# Note that some required libraries and header files aren't always
# installed; you may be better off switching on only 'fm' and 'gl'
# (Font Manager and Graphics Library).
al almodule.o -laudio # audio
cd cdmodule.o -lcdaudio -lds #
cl clmodule.o -lcl
fm fmmodule.o -lfm_s -lgl_s
gl glmodule.o -lgl_s -lX11_s
imgfile imgfilemodule.o -limage -lgutil -lm
sgi sgimodule.o
sv svmodule.o yuvconvert.o -lsvideo -lXext -lX11_s
# The FORMS library, by Mark Overmars, implements user interface
# components such as dialogs and buttons using SGI's GL and FM
# libraries. You must ftp the FORMS library separately from
# ftp://ftp.cs.ruu.nl/pub/SGI/FORMS. It was tested with FORMS 2.2a.
# The FORMS variable must point to the FORMS subdirectory of the forms
# toplevel directory.
FORMS=/ufs/guido/src/forms/FORMS
fl flmodule.o -I$(FORMS) $(FORMS)/libforms.a
# SunOS specific modules -- off by default
# sunaudiodev sunaudiodevmodule.o
# Thread module -- works on SGI IRIX and on SunOS 5.x (SOLARIS) only.
# Note that you must have configured (and built!) Python with the
# --with-thread option passed to the configure script for this to work.
thread threadmodule.o
# GNN's timing module
timing timingmodule.o
# Example -- included for reference only
# xx xxmodule.o
Modules/Setup.irix5
Dosyayı görüntüle @ e4c6131b
......@@ -65,6 +65,7 @@ dbm dbmmodule.o # dbm(3) may require -ldbm or similar
fcntl fcntlmodule.o # fcntl(2) and ioctl(2)
nis nismodule.o # Sun yellow pages -- not everywhere
pwd grp pwdmodule.o # pwd(3) and grp(3)
crypt cryptmodule.o # crypt(3)
select selectmodule.o # select(2); not on ancient System V
socket socketmodule.o # socket(2); not on ancient System V
......
Modules/Setup.minix deleted 100644 → 0
Dosyayı görüntüle @ 7a325c38
# Each line in this file describes one or more optional modules.
# Comment out lines to suppress modules.
# Lines have the following structure:
#
# <module> ... [<objectfile> ...] [<cpparg> ...] [<library> ...]
#
# <objectfile> is anything ending in .o
# <cpparg> is anything starting with -I, -D, -U or -C
# <library> is anything ending in .a or beginning with -l or -L
# <module> is anything else but should be a valid Python
# identifier (letters, digits, underscores, beginning with non-digit)
#
# Lines can also have the form
#
# <name> = <value>
#
# which defines a Make variable definition inserted into Makefile.in
#
# NOTE: As a standard policy, as many modules as can be supported by a
# platform should be present. The distribution comes with all modules
# enabled that are supported by most platforms and don't require you
# to ftp sources from elsewhere. To make this easier for SGI
# platforms, you can copy Setup.sgi to Setup (or edit Makefile.in.in
# to use Setup.sgi instead of Setup).
# Some special rules to define PYTHONPATH
# Edit the definitions below to indicate which options you are using
# Don't edit this (usually)
DESTLIB=$(prefix)/lib/python
# Standard enabled (tests are always available)
TESTPATH=:$(DESTLIB)/test
# Enable this for SGI systems
#ARCHPATH=:$(DESTLIB)/sgi
# Enable this for Sun systems
#ARCHPATH=:$(DESTLIB)/sun4
# Enable this if stdwin installed
#STDWINPATH=:$(DESTLIB)/stdwin
PYTHONPATH=.:$(DESTLIB)$(TESTPATH)$(ARCHPATH)$(STDWINPATH)
# Modules that should always be present (non UNIX dependent)
array arraymodule.o # array objects
math mathmodule.o # math library functions, e.g. sin()
parser parsermodule.o # raw interface to the Python parser
posix posixmodule.o # posix (UNIX) system calls
regex regexmodule.o regexpr.o # Regular expressions, GNU Emacs style
strop stropmodule.o # fast string operations implemented in C
struct structmodule.o # binary structure packing/unpacking
time timemodule.o # time operations and variables
# Modules with some UNIX dependencies -- on by default.
# Note that some UNIX versions still don't support all of these
# so you may have to comment them out before the build completes.
#dbm dbmmodule.o # dbm(3) may require -ldbm or similar
fcntl fcntlmodule.o # fcntl(2) and ioctl(2)
#nis nismodule.o # Sun yellow pages -- not everywhere
pwd grp pwdmodule.o # pwd(3) and grp(3)
#select selectmodule.o # select(2); not on ancient System V
#socket socketmodule.o # socket(2); not on ancient System V
# Multimedia modules -- on by default
# These represent audio samples or images as strings
#audioop audioopmodule.o # Operations on audio samples
#imageop imageopmodule.o # Operations on images
#rgbimg rgbimgmodule.o # Read SGI RGB image files (but coded portably)
# The stdwin module provides a simple, portable (between X11 and Mac)
# windowing interface. You need to ftp the STDWIN library, e.g. from
# ftp://ftp.cwi.nl/pub/stdwin. The STDWIN variable must point to the
# STDWIN toplevel directory. The ARCH variable must be set to the
# architecture identifier used to build STDWIN. NB if you combine this
# with the gl module on an SGI machine, you should replace "-lX11" with
# "-lX11_s".
#STDWIN=/ufs/guido/src/stdwin
#ARCH=???
#stdwin stdwinmodule.o -I$(STDWIN)/H $(STDWIN)/Build/$(ARCH)/x11/lib/lib.a -lX11
# The md5 module implements the RSA Data Security, Inc. MD5
# Message-Digest Algorithm, described in RFC 1321. The necessary files
# md5c.c and md5.h are included here.
md5 md5module.o md5c.o
# The mpz module interfaces to the GNU Multiple Precision library.
# You need to ftp the GNU MP library. This was last tested with a
# somewhat modified (to get around bugs) version of GMP 1.2; it will
# likely need some work for more recent versions. The GMP variable
# must point to the GMP source directory.
#GMP=/ufs/guido/src/gmp
#mpz mpzmodule.o -I$(GMP) $(GMP)/libgmp.a
# The rotor module (contributed by Lance Ellinghouse) implements a
# rotor-based encryption algorithm. It is self-contained.
rotor rotormodule.o
# SGI IRIX specific modules -- off by default.
# Switch this on if you have an SGI machine.
# Note that some required libraries and header files aren't always
# installed; you may be better off switching on only 'fm' and 'gl'
# (Font Manager and Graphics Library).
#al almodule.o -laudio # audio
#cd cdmodule.o -lcdaudio -lds #
#cl clmodule.o -lcl
#fm fmmodule.o -lfm_s -lgl_s
#gl glmodule.o -lgl_s -lX11_s
#imgfile imgfilemodule.o -limage -lgutil -lm
#sgi sgimodule.o
#sv svmodule.o yuvconvert.o -lsvideo -lXext -lX11_s
# The FORMS library, by Mark Overmars, implements user interface
# components such as dialogs and buttons using SGI's GL and FM
# libraries. You must ftp the FORMS library separately from
# ftp://ftp.cs.ruu.nl/pub/SGI/FORMS. It was tested with FORMS 2.2a.
# The FORMS variable must point to the FORMS subdirectory of the forms
# toplevel directory.
#FORMS=/ufs/guido/src/forms/FORMS
#fl flmodule.o -I$(FORMS) $(FORMS)/libforms.a
# SunOS specific modules -- off by default
#sunaudiodev sunaudiodevmodule.o
# Thread module -- works on SGI IRIX and on SunOS 5.x (SOLARIS) only.
# Note that you must have configured (and built!) Python with the
# --with-thread option passed to the configure script for this to work.
# thread threadmodule.o
# GNN's timing module
timing timingmodule.o
# Example -- included for reference only
# xx xxmodule.o
Modules/cryptmodule.c 0 → 100644
Dosyayı görüntüle @ e4c6131b
/* cryptmodule.c - by Steve Majewski
*/
#include "allobjects.h"
#include "modsupport.h"
#include <sys/types.h>
/* Module crypt */
static object *crypt_crypt(self, args)
object *self, *args;
{
char *word, *salt;
extern char * crypt();
struct passwd *p;
if (!getargs(args, "(ss)", &word, &salt)) {
return NULL;
}
return newstringobject( crypt( word, salt ) );
}
static struct methodlist crypt_methods[] = {
{"crypt", crypt_crypt},
{NULL, NULL} /* sentinel */
};
void
initcrypt()
{
initmodule("crypt", crypt_methods);
}
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment