* Add tokenization of :=
- Add token to Include/token.h. Add token to documentation in Doc/library/token.rst.
- Run `./python Lib/token.py` to regenerate Lib/token.py.
- Update Parser/tokenizer.c: add case to handle `:=`.

* Add initial usage of := in grammar.

* Update Python.asdl to match the grammar updates. Regenerated Include/Python-ast.h and Python/Python-ast.c

* Update AST and compiler files in Python/ast.c and Python/compile.c. Basic functionality, this isn't scoped properly

* Regenerate Lib/symbol.py using `./python Lib/symbol.py`

* Tests - Fix failing tests in test_parser.py due to changes in token numbers for internal representation

* Tests - Add simple test for := token

* Tests - Add simple tests for named expressions using expr and suite

* Tests - Update number of levels for nested expressions to prevent stack overflow

* Update symbol table to handle NamedExpr

* Update Grammar to allow assignment expressions in if statements.
Regenerate Python/graminit.c accordingly using `make regen-grammar`

* Tests - Add additional tests for named expressions in RoundtripLegalSyntaxTestCase, based on examples and information directly from PEP 572

Note: failing tests are currently commented out (4 out of 24 tests currently fail)

* Tests - Add temporary syntax test failure tests in test_parser.py

Note: There is an outstanding TODO for this -- syntax tests need to be
moved to a different file (presumably test_syntax.py), but this is
covering what needs to be tested at the moment, and it's more convenient
to run a single test for the time being

* Add support for allowing assignment expressions as function argument annotations. Uncomment tests for these cases because they all pass now!

* Tests - Move existing syntax tests out of test_parser.py and into test_named_expressions.py. Refactor syntax tests to use unittest

* Add TargetScopeError exception to extend SyntaxError

Note: This simply creates the TargetScopeError exception, it is not yet
used anywhere

* Tests - Update tests per PEP 572

Continue refactoring test suite:
The named expression test suite now checks for any invalid cases that
throw exceptions (no longer limited to SyntaxErrors), assignment tests
to ensure that variables are properly assigned, and scope tests to
ensure that variable availability and values are correct

Note:
- There are still tests that are marked to skip, as they are not yet
implemented
- There are approximately 300 lines of the PEP that have not yet been
addressed, though these may be deferred

* Documentation - Small updates to XXX/todo comments

- Remove XXX from child description in ast.c
- Add comment with number of previously supported nested expressions for
3.7.X in test_parser.py

* Fix assert in seq_for_testlist()

* Cleanup - Denote "Not implemented -- No keyword args" on failing test case. Fix PEP8 error for blank lines at beginning of test classes in test_parser.py

* Tests - Wrap all file opens in `with...as` to ensure files are closed

* WIP: handle f(a := 1)

* Tests and Cleanup - No longer skips keyword arg test. Keyword arg test now uses a simpler test case and does not rely on an external file. Remove print statements from ast.c

* Tests - Refactor last remaining test case that relied on on external file to use a simpler test case without the dependency

* Tests - Add better description of remaning skipped tests. Add test checking scope when using assignment expression in a function argument

* Tests - Add test for nested comprehension, testing value and scope. Fix variable name in skipped comprehension scope test

* Handle restriction of LHS for named expressions - can only assign to LHS of type NAME. Specifically, restrict assignment to tuples

This adds an alternative set_context specifically for named expressions,
set_namedexpr_context. Thus, context is now set differently for standard
assignment versus assignment for named expressions in order to handle
restrictions.

* Tests - Update negative test case for assigning to lambda to match new error message. Add negative test case for assigning to tuple

* Tests - Reorder test cases to group invalid syntax cases and named assignment target errors

* Tests - Update test case for named expression in function argument - check that result and variable are set correctly

* Todo - Add todo for TargetScopeError based on Guido's comment (https://github.com/python/cpython/commit/2b3acd37bdfc2d35e5094228c6684050d2aa8b0a#r30472562)

* Tests - Add named expression tests for assignment operator in function arguments

Note: One of two tests are skipped, as function arguments are currently treating
an assignment expression inside of parenthesis as one child, which does
not properly catch the named expression, nor does it count arguments
properly

* Add NamedStore to expr_context. Regenerate related code with `make regen-ast`

* Add usage of NamedStore to ast_for_named_expr in ast.c. Update occurances of checking for Store to also handle NamedStore where appropriate

* Add ste_comprehension to _symtable_entry to track if the namespace is a comprehension. Initialize ste_comprehension to 0. Set set_comprehension to 1 in symtable_handle_comprehension

* s/symtable_add_def/symtable_add_def_helper. Add symtable_add_def to handle grabbing st->st_cur and passing it to symtable_add_def_helper. This now allows us to call the original code from symtable_add_def by instead calling symtable_add_def_helper with a different ste.

* Refactor symtable_record_directive to take lineno and col_offset as arguments instead of stmt_ty. This allows symtable_record_directive to be used for stmt_ty and expr_ty

* Handle elevating scope for named expressions in comprehensions.

* Handle error for usage of named expression inside a class block

* Tests - No longer skip scope tests. Add additional scope tests

* Cleanup - Update error message for named expression within a comprehension within a class. Update comments. Add assert for symtable_extend_namedexpr_scope to validate that we always find at least a ModuleScope if we don't find a Class or FunctionScope

* Cleanup - Add missing case for NamedStore in expr_context_name. Remove unused var in set_namedexpr_content

* Refactor - Consolidate set_context and set_namedexpr_context to reduce duplicated code. Special cases for named expressions are handled by checking if ctx is NamedStore

* Cleanup - Add additional use cases for ast_for_namedexpr in usage comment. Fix multiple blank lines in test_named_expressions

* Tests - Remove unnecessary test case. Renumber test case function names

* Remove TargetScopeError for now. Will add back if needed

* Cleanup - Small comment nit for consistency

* Handle positional argument check with named expression

* Add TargetScopeError exception definition. Add documentation for TargetScopeError in c-api docs. Throw TargetScopeError instead of SyntaxError when using a named expression in a comprehension within a class scope

* Increase stack size for parser by 200. This is a minimal change (approx. 5kb) and should not have an impact on any systems. Update parser test to allow 99 nested levels again

* Add TargetScopeError to exception_hierarchy.txt for test_baseexception.py_

* Tests - Major update for named expression tests, both in test_named_expressions and test_parser

- Add test for TargetScopeError
- Add tests for named expressions in comprehension scope and edge cases
- Add tests for named expressions in function arguments (declarations
and call sites)
- Reorganize tests to group them more logically

* Cleanup - Remove unnecessary comment

* Cleanup - Comment nitpicks

* Explicitly disallow assignment expressions to a name inside parentheses, e.g.: ((x) := 0)

- Add check for LHS types to detect a parenthesis then a name (see note)
- Add test for this scenario
- Update tests for changed error message for named assignment to a tuple
(also, see note)

Note: This caused issues with the previous error handling for named assignment
to a LHS that contained an expression, such as a tuple. Thus, the check
for the LHS of a named expression must be changed to be more specific if
we wish to maintain the previous error messages

* Cleanup - Wrap lines more strictly in test file

* Revert "Explicitly disallow assignment expressions to a name inside parentheses, e.g.: ((x) := 0)"

This reverts commit f1531400ca7d7a2d148830c8ac703f041740896d.

* Add NEWS.d entry

* Tests - Fix error in test_pickle.test_exceptions by adding TargetScopeError to list of exceptions

* Tests - Update error message tests to reflect improved messaging convention (s/can't/cannot)

* Remove cases that cannot be reached in compile.c. Small linting update.

* Update Grammar/Tokens to add COLONEQUAL. Regenerate all files

* Update TargetScopeError PRE_INIT and POST_INIT, as this was purposefully left out when fixing rebase conflicts

* Add NamedStore back and regenerate files

* Pass along line number and end col info for named expression

* Simplify News entry

* Fix compiler warning and explicity mark fallthrough

https://bugs.python.org/issue17467

* subprocess.Popen can now also use os.posix_spawn() with pipes,
  but only if pipe file descriptors are greater than 2.
* Fix Popen._posix_spawn(): set '_child_created' attribute to True.
* Add Popen._close_pipe_fds() helper function to factorize the code.

* Rename _PySys_BeginInit() to _PySys_InitCore().
* Rename _PySys_EndInit() to _PySys_InitMain().
* Add _PySys_Create(). It calls _PySys_InitCore() which becomes
  private.
* Add _PySys_SetPreliminaryStderr().
* Rename _Py_ReadyTypes() to _PyTypes_Init().
* Misc code cleanup.

bpo-35781: Changed references to deprecated 'warn' method in logging documentation in favour of 'warning' (GH-11654)

QueueHandler.prepare() now makes a copy of the record before modifying and enqueueing it, to avoid affecting other handlers in the chain.

* Split _Py_InitializeCore_impl() into subfunctions: add multiple pycore_init_xxx() functions
* Preliminary sys.stderr is now set earlier to get an usable
  sys.stderr ealier.
* Move code into _Py_Initialize_ReconfigureCore() to be able to call
  it from _Py_InitializeCore().
* Split _PyExc_Init(): create a new _PyBuiltins_AddExceptions()
  function.
* Call _PyExc_Init() earlier in _Py_InitializeCore_impl()
  and new_interpreter() to get working exceptions earlier.
* _Py_ReadyTypes() now returns _PyInitError rather than calling
  Py_FatalError().
* Misc code cleanup

* The PyByteArray_Init() and PyByteArray_Fini() functions have been
  removed. They did nothing since Python 2.7.4 and Python 3.2.0, were
  excluded from the limited API (stable ABI), and were not
  documented.
* Move "_PyXXX_Init()" and "_PyXXX_Fini()" declarations from
  Include/cpython/pylifecycle.h to
  Include/internal/pycore_pylifecycle.h. Replace
  "PyAPI_FUNC(TYPE)" with "extern TYPE".
* _PyExc_Init() now returns an error on failure rather than calling
  Py_FatalError(). Move macros inside _PyExc_Init() and undefine them
  when done. Rewrite macros to make them look more like statement:
  add ";" when using them, add "do { ... } while (0)".
* _PyUnicode_Init() now returns a _PyInitError error rather than call
  Py_FatalError().
* Move stdin check from _PySys_BeginInit() to init_sys_streams().
* _Py_ReadyTypes() now returns a _PyInitError error rather than
  calling Py_FatalError().

When the loop in the pymain_read_conf function in this same file
calls pymain_init_cmdline_argv() a 2nd time, the pymain->command
buffer of wchar_t is overriden and the previously allocated memory
is never freed.

The majority of this PR is tediously passing `end_lineno` and `end_col_offset` everywhere. Here are non-trivial points:
* It is not possible to reconstruct end positions in AST "on the fly", some information is lost after an AST node is constructed, so we need two more attributes for every AST node `end_lineno` and `end_col_offset`.
* I add end position information to both CST and AST.  Although it may be technically possible to avoid adding end positions to CST, the code becomes more cumbersome and less efficient.
* Since the end position is not known for non-leaf CST nodes while the next token is added, this requires a bit of extra care (see `_PyNode_FinalizeEndPos`). Unless I made some mistake, the algorithm should be linear.
* For statements, I "trim" the end position of suites to not include the terminal newlines and dedent (this seems to be what people would expect), for example in
  ```python
  class C:
      pass

  pass
  ```
  the end line and end column for the class definition is (2, 8).
* For `end_col_offset` I use the common Python convention for indexing, for example for `pass` the `end_col_offset` is 4 (not 3), so that `[0:4]` gives one the source code that corresponds to the node.
* I added a helper function `ast.get_source_segment()`, to get source text segment corresponding to a given AST node. It is also useful for testing.

An (inevitable) downside of this PR is that AST now takes almost 25% more memory. I think however it is probably justified by the benefits.

* Disable x87 control word for non-x86 targets

On msvc, x87 control word is only available on x86 target. Need to disable it for other targets to prevent compiling problems.

* Include immintrin.h on x86 and x64 only

Immintrin.h is only available on x86 and x64. Need to disable it for other targets to prevent compiling problems.

https://bugs.python.org/issue35782

PermissionError can be raised if there are directories in the $PATH that are not accessible
when using posix_spawnp.

Fix sparse file tests of test_tarfile on ppc64le with the tmpfs
filesystem.

Fix the function testing if the filesystem supports sparse files:
create a file which contains data and "holes", instead of creating a
file which contains no data.

tmpfs effective block size is a page size (tmpfs lives in the page
cache). RHEL uses 64 KiB pages on aarch64, ppc64 and ppc64le, only
s390x and x86_64 use 4 KiB pages, whereas the test punch holes of
4 KiB.

test.pythoninfo: Add resource.getpagesize().

* Allow repeated deletion of unittest.mock.Mock attributes

* fixup! Allow repeated deletion of unittest.mock.Mock attributes

* fixup! fixup! Allow repeated deletion of unittest.mock.Mock attributes

It previously deleted Window => Zoom Height by mistake.
(Zoom Height is now on the Options menu).  On Mac, the settings
dialog is accessed via Preferences on the IDLE menu.

Document http.client.parse_headers

Make ssl tests less strict and also accept TLSv1 as system default. The
changes unbreaks test_min_max_version on Fedora 29.
Signed-off-by: Christian Heimes <christian@python.org>

'Untitled' violates the PEP 8 standard for .py files

Tix was deprecated in 3.6 and the doc is wrong.  New users should use ttk.

Added test for weakreferencing a uuid.UUID object.

Add a deprecated warning for the threading.Thread.isAlive() method.

Typo fix for method doc, I'm pretty sure coro is meant, because there's no consumer threads for thread-unsafe queue.

Most probably this piece of doc was copied from `queue.Queue`

There's not BPO bug for this, afaik.

While the introduction of ModuleNotFoundError was fully backwards
compatible on the import API consumer side, folks providing alternative
implementations of `__import__` need to make an update to be
forward compatible with clients that start relying on the new subclass.



https://bugs.python.org/issue35486

This reverts commit 07858894.

The subprocess module can now use the os.posix_spawnp() function,
if it is available, to locate the program in the PATH.

Add a new os.posix_spawnp() function.