Kaydet (Commit) 48231d12 authored tarafından Linus Behrens's avatar Linus Behrens Kaydeden (comit) Caolán McNamara

Replaced nAnz, nObjAnz with nCount, nObjCount respectively

Change-Id: I4a479828650a3015670561cf391befa3da731bae
Reviewed-on: https://gerrit.libreoffice.org/15494Tested-by: 's avatarJenkins <ci@libreoffice.org>
Reviewed-by: 's avatarCaolán McNamara <caolanm@redhat.com>
Tested-by: 's avatarCaolán McNamara <caolanm@redhat.com>
üst 01f2d3fe
......@@ -326,10 +326,10 @@ void SdrModel::SetReadOnly(bool bYes)
void SdrModel::SetMaxUndoActionCount(sal_uIntPtr nAnz)
void SdrModel::SetMaxUndoActionCount(sal_uIntPtr nCount)
{
if (nAnz<1) nAnz=1;
nMaxUndoCount=nAnz;
if (nCount<1) nCount=1;
nMaxUndoCount=nCount;
if (pUndoStack!=NULL) {
while (pUndoStack->size()>nMaxUndoCount) {
delete pUndoStack->back();
......@@ -671,8 +671,8 @@ void SdrModel::ClearModel(bool bCalledFromDestructor)
sal_Int32 i;
// delete all drawing pages
sal_Int32 nAnz=GetPageCount();
for (i=nAnz-1; i>=0; i--)
sal_Int32 nCount=GetPageCount();
for (i=nCount-1; i>=0; i--)
{
DeletePage( (sal_uInt16)i );
}
......@@ -680,8 +680,8 @@ void SdrModel::ClearModel(bool bCalledFromDestructor)
PageListChanged();
// delete all Masterpages
nAnz=GetMasterPageCount();
for(i=nAnz-1; i>=0; i--)
nCount=GetMasterPageCount();
for(i=nCount-1; i>=0; i--)
{
DeleteMasterPage( (sal_uInt16)i );
}
......@@ -835,13 +835,13 @@ void SdrModel::ImpReformatAllTextObjects()
if( isLocked() )
return;
sal_uInt16 nAnz=GetMasterPageCount();
sal_uInt16 nCount=GetMasterPageCount();
sal_uInt16 nNum;
for (nNum=0; nNum<nAnz; nNum++) {
for (nNum=0; nNum<nCount; nNum++) {
GetMasterPage(nNum)->ReformatAllTextObjects();
}
nAnz=GetPageCount();
for (nNum=0; nNum<nAnz; nNum++) {
nCount=GetPageCount();
for (nNum=0; nNum<nCount; nNum++) {
GetPage(nNum)->ReformatAllTextObjects();
}
}
......@@ -855,14 +855,14 @@ void SdrModel::ImpReformatAllEdgeObjects()
if( isLocked() )
return;
sal_uInt16 nAnz=GetMasterPageCount();
sal_uInt16 nCount=GetMasterPageCount();
sal_uInt16 nNum;
for (nNum=0; nNum<nAnz; nNum++)
for (nNum=0; nNum<nCount; nNum++)
{
GetMasterPage(nNum)->ReformatAllEdgeObjects();
}
nAnz=GetPageCount();
for (nNum=0; nNum<nAnz; nNum++)
nCount=GetPageCount();
for (nNum=0; nNum<nCount; nNum++)
{
GetPage(nNum)->ReformatAllEdgeObjects();
}
......@@ -910,13 +910,13 @@ SdrModel::GetDocumentStream( OUString const& rURL,
// convert template attributes from the string into "hard" attributes
void SdrModel::BurnInStyleSheetAttributes()
{
sal_uInt16 nAnz=GetMasterPageCount();
sal_uInt16 nCount=GetMasterPageCount();
sal_uInt16 nNum;
for (nNum=0; nNum<nAnz; nNum++) {
for (nNum=0; nNum<nCount; nNum++) {
GetMasterPage(nNum)->BurnInStyleSheetAttributes();
}
nAnz=GetPageCount();
for (nNum=0; nNum<nAnz; nNum++) {
nCount=GetPageCount();
for (nNum=0; nNum<nCount; nNum++) {
GetPage(nNum)->BurnInStyleSheetAttributes();
}
}
......@@ -1252,9 +1252,9 @@ void SdrModel::TakeMetricStr(long nVal, OUString& rStr, bool bNoUnitChars, sal_I
if(nKomma < 0)
{
// negative nKomma (decimal point) means: add zeros
sal_Int32 nAnz(-nKomma);
sal_Int32 nCount(-nKomma);
for(sal_Int32 i=0; i<nAnz; i++)
for(sal_Int32 i=0; i<nCount; i++)
aBuf.append('0');
nKomma = 0;
......@@ -1265,12 +1265,12 @@ void SdrModel::TakeMetricStr(long nVal, OUString& rStr, bool bNoUnitChars, sal_I
if (nKomma > 0 && aBuf.getLength() <= nKomma)
{
// if necessary, add zeros before the decimal point
sal_Int32 nAnz = nKomma - aBuf.getLength();
sal_Int32 nCount = nKomma - aBuf.getLength();
if(nAnz >= 0 && LocaleDataWrapper::isNumLeadingZero())
nAnz++;
if(nCount >= 0 && LocaleDataWrapper::isNumLeadingZero())
nCount++;
for(sal_Int32 i=0; i<nAnz; i++)
for(sal_Int32 i=0; i<nCount; i++)
aBuf.insert(0, '0');
}
......@@ -1336,12 +1336,12 @@ void SdrModel::TakeAngleStr(long nAngle, OUString& rStr, bool bNoDegChar)
SvtSysLocale aSysLoc;
const LocaleDataWrapper& rLoc = aSysLoc.GetLocaleData();
sal_Int32 nAnz = 2;
sal_Int32 nCount = 2;
if(LocaleDataWrapper::isNumLeadingZero())
nAnz++;
nCount++;
while(aBuf.getLength() < nAnz)
while(aBuf.getLength() < nCount)
aBuf.insert(0, '0');
aBuf.insert(aBuf.getLength()-2, rLoc.getNumDecimalSep()[0]);
......@@ -1392,9 +1392,9 @@ void SdrModel::RecalcPageNums(bool bMaster)
{
if(bMaster)
{
sal_uInt16 nAnz=sal_uInt16(maMaPag.size());
sal_uInt16 nCount=sal_uInt16(maMaPag.size());
sal_uInt16 i;
for (i=0; i<nAnz; i++) {
for (i=0; i<nCount; i++) {
SdrPage* pPg=maMaPag[i];
pPg->SetPageNum(i);
}
......@@ -1402,9 +1402,9 @@ void SdrModel::RecalcPageNums(bool bMaster)
}
else
{
sal_uInt16 nAnz=sal_uInt16(maPages.size());
sal_uInt16 nCount=sal_uInt16(maPages.size());
sal_uInt16 i;
for (i=0; i<nAnz; i++) {
for (i=0; i<nCount; i++) {
SdrPage* pPg=maPages[i];
pPg->SetPageNum(i);
}
......@@ -1414,14 +1414,14 @@ void SdrModel::RecalcPageNums(bool bMaster)
void SdrModel::InsertPage(SdrPage* pPage, sal_uInt16 nPos)
{
sal_uInt16 nAnz=GetPageCount();
if (nPos>nAnz) nPos=nAnz;
sal_uInt16 nCount=GetPageCount();
if (nPos>nCount) nPos=nCount;
maPages.insert(maPages.begin()+nPos,pPage);
PageListChanged();
pPage->SetInserted(true);
pPage->SetPageNum(nPos);
pPage->SetModel(this);
if (nPos<nAnz) bPagNumsDirty=true;
if (nPos<nCount) bPagNumsDirty=true;
SetChanged();
SdrHint aHint(HINT_PAGEORDERCHG);
aHint.SetPage(pPage);
......@@ -1465,14 +1465,14 @@ void SdrModel::MovePage(sal_uInt16 nPgNum, sal_uInt16 nNewPos)
void SdrModel::InsertMasterPage(SdrPage* pPage, sal_uInt16 nPos)
{
sal_uInt16 nAnz=GetMasterPageCount();
if (nPos>nAnz) nPos=nAnz;
sal_uInt16 nCount=GetMasterPageCount();
if (nPos>nCount) nPos=nCount;
maMaPag.insert(maMaPag.begin()+nPos,pPage);
MasterPageListChanged();
pPage->SetInserted(true);
pPage->SetPageNum(nPos);
pPage->SetModel(this);
if (nPos<nAnz) {
if (nPos<nCount) {
bMPgNumsDirty=true;
}
SetChanged();
......
......@@ -89,8 +89,8 @@ void SdrObjGroup::TakeObjInfo(SdrObjTransformInfoRec& rInfo) const
{
rInfo.bNoContortion=false;
SdrObjList* pOL=pSub;
const size_t nObjAnz = pOL->GetObjCount();
for (size_t i=0; i<nObjAnz; ++i) {
const size_t nObjCount = pOL->GetObjCount();
for (size_t i=0; i<nObjCount; ++i) {
SdrObject* pObj=pOL->GetObj(i);
SdrObjTransformInfoRec aInfo;
pObj->TakeObjInfo(aInfo);
......@@ -115,7 +115,7 @@ void SdrObjGroup::TakeObjInfo(SdrObjTransformInfoRec& rInfo) const
if (!aInfo.bCanConvToPathLineToArea) rInfo.bCanConvToPathLineToArea=false;
if (!aInfo.bCanConvToPolyLineToArea) rInfo.bCanConvToPolyLineToArea=false;
}
if (nObjAnz==0) {
if (nObjCount==0) {
rInfo.bRotateFreeAllowed=false;
rInfo.bRotate90Allowed =false;
rInfo.bMirrorFreeAllowed=false;
......@@ -127,7 +127,7 @@ void SdrObjGroup::TakeObjInfo(SdrObjTransformInfoRec& rInfo) const
rInfo.bEdgeRadiusAllowed=false;
rInfo.bNoContortion =true;
}
if(nObjAnz != 1)
if(nObjCount != 1)
{
// only allowed if single object selected
rInfo.bTransparenceAllowed = false;
......@@ -153,8 +153,8 @@ SdrLayerID SdrObjGroup::GetLayer() const
bool b1st = true;
SdrLayerID nLay=SdrLayerID(SdrObject::GetLayer());
SdrObjList* pOL=pSub;
const size_t nObjAnz = pOL->GetObjCount();
for (size_t i=0; i<nObjAnz; ++i) {
const size_t nObjCount = pOL->GetObjCount();
for (size_t i=0; i<nObjCount; ++i) {
SdrLayerID nLay1=pOL->GetObj(i)->GetLayer();
if (b1st) { nLay=nLay1; b1st = false; }
else if (nLay1!=nLay) return 0;
......@@ -167,8 +167,8 @@ void SdrObjGroup::NbcSetLayer(SdrLayerID nLayer)
{
SdrObject::NbcSetLayer(nLayer);
SdrObjList* pOL=pSub;
const size_t nObjAnz = pOL->GetObjCount();
for (size_t i=0; i<nObjAnz; ++i) {
const size_t nObjCount = pOL->GetObjCount();
for (size_t i=0; i<nObjCount; ++i) {
pOL->GetObj(i)->NbcSetLayer(nLayer);
}
}
......@@ -425,8 +425,8 @@ void SdrObjGroup::NbcMove(const Size& rSiz)
MovePoint(aRefPoint,rSiz);
if (pSub->GetObjCount()!=0) {
SdrObjList* pOL=pSub;
const size_t nObjAnz = pOL->GetObjCount();
for (size_t i=0; i<nObjAnz; ++i) {
const size_t nObjCount = pOL->GetObjCount();
for (size_t i=0; i<nObjCount; ++i) {
SdrObject* pObj=pOL->GetObj(i);
pObj->NbcMove(rSiz);
}
......@@ -457,8 +457,8 @@ void SdrObjGroup::NbcResize(const Point& rRef, const Fraction& xFact, const Frac
ResizePoint(aRefPoint,rRef,xFact,yFact);
if (pSub->GetObjCount()!=0) {
SdrObjList* pOL=pSub;
const size_t nObjAnz = pOL->GetObjCount();
for (size_t i=0; i<nObjAnz; ++i) {
const size_t nObjCount = pOL->GetObjCount();
for (size_t i=0; i<nObjCount; ++i) {
SdrObject* pObj=pOL->GetObj(i);
pObj->NbcResize(rRef,xFact,yFact);
}
......@@ -474,8 +474,8 @@ void SdrObjGroup::NbcRotate(const Point& rRef, long nAngle, double sn, double cs
SetGlueReallyAbsolute(true);
RotatePoint(aRefPoint,rRef,sn,cs);
SdrObjList* pOL=pSub;
const size_t nObjAnz = pOL->GetObjCount();
for (size_t i=0; i<nObjAnz; ++i) {
const size_t nObjCount = pOL->GetObjCount();
for (size_t i=0; i<nObjCount; ++i) {
SdrObject* pObj=pOL->GetObj(i);
pObj->NbcRotate(rRef,nAngle,sn,cs);
}
......@@ -489,8 +489,8 @@ void SdrObjGroup::NbcMirror(const Point& rRef1, const Point& rRef2)
SetGlueReallyAbsolute(true);
MirrorPoint(aRefPoint,rRef1,rRef2); // implementation missing in SvdEtc!
SdrObjList* pOL=pSub;
const size_t nObjAnz = pOL->GetObjCount();
for (size_t i=0; i<nObjAnz; ++i) {
const size_t nObjCount = pOL->GetObjCount();
for (size_t i=0; i<nObjCount; ++i) {
SdrObject* pObj=pOL->GetObj(i);
pObj->NbcMirror(rRef1,rRef2);
}
......@@ -504,8 +504,8 @@ void SdrObjGroup::NbcShear(const Point& rRef, long nAngle, double tn, bool bVShe
SetGlueReallyAbsolute(true);
ShearPoint(aRefPoint,rRef,tn);
SdrObjList* pOL=pSub;
const size_t nObjAnz = pOL->GetObjCount();
for (size_t i=0; i<nObjAnz; ++i) {
const size_t nObjCount = pOL->GetObjCount();
for (size_t i=0; i<nObjCount; ++i) {
SdrObject* pObj=pOL->GetObj(i);
pObj->NbcShear(rRef,nAngle,tn,bVShear);
}
......@@ -520,8 +520,8 @@ void SdrObjGroup::NbcSetAnchorPos(const Point& rPnt)
Size aSiz(rPnt.X()-aAnchor.X(),rPnt.Y()-aAnchor.Y());
MovePoint(aRefPoint,aSiz);
SdrObjList* pOL=pSub;
const size_t nObjAnz=pOL->GetObjCount();
for (size_t i=0; i<nObjAnz; ++i) {
const size_t nObjCount=pOL->GetObjCount();
for (size_t i=0; i<nObjCount; ++i) {
SdrObject* pObj=pOL->GetObj(i);
pObj->NbcSetAnchorPos(rPnt);
}
......@@ -567,12 +567,12 @@ void SdrObjGroup::Move(const Size& rSiz)
if (pSub->GetObjCount()!=0) {
// first move the connectors, then everything else
SdrObjList* pOL=pSub;
const size_t nObjAnz = pOL->GetObjCount();
for (size_t i=0; i<nObjAnz; ++i) {
const size_t nObjCount = pOL->GetObjCount();
for (size_t i=0; i<nObjCount; ++i) {
SdrObject* pObj=pOL->GetObj(i);
if (pObj->IsEdgeObj()) pObj->Move(rSiz);
}
for (size_t i=0; i<nObjAnz; ++i) {
for (size_t i=0; i<nObjCount; ++i) {
SdrObject* pObj=pOL->GetObj(i);
if (!pObj->IsEdgeObj()) pObj->Move(rSiz);
}
......@@ -611,12 +611,12 @@ void SdrObjGroup::Resize(const Point& rRef, const Fraction& xFact, const Fractio
if (pSub->GetObjCount()!=0) {
// move the connectors first, everything else afterwards
SdrObjList* pOL=pSub;
const size_t nObjAnz = pOL->GetObjCount();
for (size_t i=0; i<nObjAnz; ++i) {
const size_t nObjCount = pOL->GetObjCount();
for (size_t i=0; i<nObjCount; ++i) {
SdrObject* pObj=pOL->GetObj(i);
if (pObj->IsEdgeObj()) pObj->Resize(rRef,xFact,yFact,bUnsetRelative);
}
for (size_t i=0; i<nObjAnz; ++i) {
for (size_t i=0; i<nObjCount; ++i) {
SdrObject* pObj=pOL->GetObj(i);
if (!pObj->IsEdgeObj()) pObj->Resize(rRef,xFact,yFact,bUnsetRelative);
}
......@@ -640,12 +640,12 @@ void SdrObjGroup::Rotate(const Point& rRef, long nAngle, double sn, double cs)
RotatePoint(aRefPoint,rRef,sn,cs);
// move the connectors first, everything else afterwards
SdrObjList* pOL=pSub;
const size_t nObjAnz = pOL->GetObjCount();
for (size_t i=0; i<nObjAnz; ++i) {
const size_t nObjCount = pOL->GetObjCount();
for (size_t i=0; i<nObjCount; ++i) {
SdrObject* pObj=pOL->GetObj(i);
if (pObj->IsEdgeObj()) pObj->Rotate(rRef,nAngle,sn,cs);
}
for (size_t i=0; i<nObjAnz; ++i) {
for (size_t i=0; i<nObjCount; ++i) {
SdrObject* pObj=pOL->GetObj(i);
if (!pObj->IsEdgeObj()) pObj->Rotate(rRef,nAngle,sn,cs);
}
......@@ -665,12 +665,12 @@ void SdrObjGroup::Mirror(const Point& rRef1, const Point& rRef2)
MirrorPoint(aRefPoint,rRef1,rRef2); // implementation missing in SvdEtc!
// move the connectors first, everything else afterwards
SdrObjList* pOL=pSub;
const size_t nObjAnz = pOL->GetObjCount();
for (size_t i=0; i<nObjAnz; ++i) {
const size_t nObjCount = pOL->GetObjCount();
for (size_t i=0; i<nObjCount; ++i) {
SdrObject* pObj=pOL->GetObj(i);
if (pObj->IsEdgeObj()) pObj->Mirror(rRef1,rRef2);
}
for (size_t i=0; i<nObjAnz; ++i) {
for (size_t i=0; i<nObjCount; ++i) {
SdrObject* pObj=pOL->GetObj(i);
if (!pObj->IsEdgeObj()) pObj->Mirror(rRef1,rRef2);
}
......@@ -690,12 +690,12 @@ void SdrObjGroup::Shear(const Point& rRef, long nAngle, double tn, bool bVShear)
ShearPoint(aRefPoint,rRef,tn);
// move the connectors first, everything else afterwards
SdrObjList* pOL=pSub;
const size_t nObjAnz = pOL->GetObjCount();
for (size_t i=0; i<nObjAnz; ++i) {
const size_t nObjCount = pOL->GetObjCount();
for (size_t i=0; i<nObjCount; ++i) {
SdrObject* pObj=pOL->GetObj(i);
if (pObj->IsEdgeObj()) pObj->Shear(rRef,nAngle,tn,bVShear);
}
for (size_t i=0; i<nObjAnz; ++i) {
for (size_t i=0; i<nObjCount; ++i) {
SdrObject* pObj=pOL->GetObj(i);
if (!pObj->IsEdgeObj()) pObj->Shear(rRef,nAngle,tn,bVShear);
}
......@@ -717,12 +717,12 @@ void SdrObjGroup::SetAnchorPos(const Point& rPnt)
MovePoint(aRefPoint,aSiz);
// move the connectors first, everything else afterwards
SdrObjList* pOL=pSub;
const size_t nObjAnz = pOL->GetObjCount();
for (size_t i=0; i<nObjAnz; ++i) {
const size_t nObjCount = pOL->GetObjCount();
for (size_t i=0; i<nObjCount; ++i) {
SdrObject* pObj=pOL->GetObj(i);
if (pObj->IsEdgeObj()) pObj->SetAnchorPos(rPnt);
}
for (size_t i=0; i<nObjAnz; ++i) {
for (size_t i=0; i<nObjCount; ++i) {
SdrObject* pObj = pOL->GetObj(i);
if (!pObj->IsEdgeObj()) pObj->SetAnchorPos(rPnt);
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment