INTEGRATION: CWS sj05 (1.1.2); FILE ADDED

2004/03/09 13:54:54 sj 1.1.2.2: added same letter heights property for fontwork
2004/02/06 09:47:48 sj 1.1.2.1: initial version

xmloff/inc/EnhancedCustomShapeToken.hxx

+/*************************************************************************
+ *
+ *  $RCSfile: EnhancedCustomShapeToken.hxx,v $
+ *
+ *  $Revision: 1.2 $
+ *
+ *  last change: $Author: rt $ $Date: 2004-04-02 13:51:16 $
+ *
+ *  The Contents of this file are made available subject to the terms of
+ *  either of the following licenses
+ *
+ *         - GNU Lesser General Public License Version 2.1
+ *         - Sun Industry Standards Source License Version 1.1
+ *
+ *  Sun Microsystems Inc., October, 2000
+ *
+ *  GNU Lesser General Public License Version 2.1
+ *  =============================================
+ *  Copyright 2000 by Sun Microsystems, Inc.
+ *  901 San Antonio Road, Palo Alto, CA 94303, USA
+ *
+ *  This library is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU Lesser General Public
+ *  License version 2.1, as published by the Free Software Foundation.
+ *
+ *  This library is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  Lesser General Public License for more details.
+ *
+ *  You should have received a copy of the GNU Lesser General Public
+ *  License along with this library; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ *  MA  02111-1307  USA
+ *
+ *
+ *  Sun Industry Standards Source License Version 1.1
+ *  =================================================
+ *  The contents of this file are subject to the Sun Industry Standards
+ *  Source License Version 1.1 (the "License"); You may not use this file
+ *  except in compliance with the License. You may obtain a copy of the
+ *  License at http://www.openoffice.org/license.html.
+ *
+ *  Software provided under this License is provided on an "AS IS" basis,
+ *  WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
+ *  WITHOUT LIMITATION, WARRANTIES THAT THE SOFTWARE IS FREE OF DEFECTS,
+ *  MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE, OR NON-INFRINGING.
+ *  See the License for the specific provisions governing your rights and
+ *  obligations concerning the Software.
+ *
+ *  The Initial Developer of the Original Code is: Sun Microsystems, Inc.
+ *
+ *  Copyright: 2000 by Sun Microsystems, Inc.
+ *
+ *  All Rights Reserved.
+ *
+ *  Contributor(s): _______________________________________
+ *
+ *
+ ************************************************************************/
+
+#ifndef _ENHANCED_CUSTOMSHAPE_TOKEN_HXX
+#define _ENHANCED_CUSTOMSHAPE_TOKEN_HXX
+
+#include <rtl/ustring.hxx>
+
+namespace xmloff { namespace EnhancedCustomShapeToken {
+
+    enum EnhancedCustomShapeTokenEnum
+    {
+        EAS_predefined_type,
+        EAS_mirror_horizontal,
+        EAS_mirror_vertical,
+        EAS_coordinate_origin_x,
+        EAS_coordinate_origin_y,
+        EAS_coordinate_width,
+        EAS_coordinate_height,
+        EAS_text_rotate_angle,
+        EAS_extrusion_allowed,
+        EAS_text_path_allowed,
+        EAS_concentric_gradient_fill_allowed,
+        EAS_extrusion,
+        EAS_extrusion_auto_rotation_center,
+        EAS_extrusion_backward_depth,
+        EAS_extrusion_brightness,
+        EAS_extrusion_diffusity,
+        EAS_extrusion_edge,
+        EAS_extrusion_facet,
+        EAS_extrusion_foreward_depth,
+        EAS_extrusion_light_face,
+        EAS_extrusion_light_harsh1,
+        EAS_extrusion_light_harsh2,
+        EAS_extrusion_light_level1,
+        EAS_extrusion_light_level2,
+        EAS_extrusion_light_direction1,
+        EAS_extrusion_light_direction2,
+        EAS_extrusion_metal,
+        EAS_extrusion_plane,
+        EAS_extrusion_render_mode,
+        EAS_extrusion_rotation_angle_x,
+        EAS_extrusion_rotation_angle_y,
+        EAS_extrusion_rotation_center_x,
+        EAS_extrusion_rotation_center_y,
+        EAS_extrusion_rotation_center_z,
+        EAS_extrusion_shininess,
+        EAS_extrusion_skew,
+        EAS_extrusion_skew_angle,
+        EAS_extrusion_specularity,
+        EAS_extrusion_parallel,
+        EAS_extrusion_viewpoint,
+        EAS_extrusion_origin_x,
+        EAS_extrusion_origin_y,
+        EAS_extrusion_color,
+        EAS_enhanced_path,
+        EAS_path_stretchpoint_x,
+        EAS_path_stretchpoint_y,
+        EAS_text_frames,
+        EAS_glue_points,
+        EAS_glue_point_type,
+        EAS_glue_point_leaving_directions,
+        EAS_text_path,
+        EAS_text_path_fit_text,
+        EAS_text_path_fit_shape,
+        EAS_text_path_scale_x,
+        EAS_text_path_same_letter_heights,
+        EAS_adjustments,
+        EAS_equation,
+        EAS_formula,
+        EAS_handle,
+        EAS_handle_mirror_horizontal,
+        EAS_handle_mirror_vertical,
+        EAS_handle_switched,
+        EAS_handle_position,
+        EAS_handle_range_x_minimum,
+        EAS_handle_range_x_maximum,
+        EAS_handle_range_y_minimum,
+        EAS_handle_range_y_maximum,
+        EAS_handle_polar,
+        EAS_handle_radius_range_minimum,
+        EAS_handle_radius_range_maximum,
+        EAS_callout,
+        EAS_callout_accent_bar,
+        EAS_callout_angle,
+        EAS_callout_drop_distance,
+        EAS_callout_drop,
+        EAS_callout_drop_automatic,
+        EAS_callout_gap,
+        EAS_callout_length,
+        EAS_callout_length_specified,
+        EAS_callout_flip_x,
+        EAS_callout_flip_y,
+        EAS_callout_text_border,
+        EAS_callout_type,
+
+        EAS_CustomShapeEngine,
+        EAS_CustomShapeData,
+        EAS_PredefinedType,
+        EAS_MirroredX,
+        EAS_MirroredY,
+        EAS_CoordinateOrigin,
+        EAS_CoordinateSize,
+        EAS_TextRotateAngle,
+        EAS_ExtrusionAllowed,
+        EAS_ConcentricGradientFillAllowed,
+        EAS_TextPathAllowed,
+        EAS_Callout,
+        EAS_Extrusion,
+        EAS_Equations,
+        EAS_Equation,
+        EAS_Path,
+        EAS_TextPath,
+        EAS_Handles,
+        EAS_Handle,
+        EAS_On,
+        EAS_AutoRotationCenter,
+        EAS_BackwardDepth,
+        EAS_Brightness,
+        EAS_Diffusity,
+        EAS_Edge,
+        EAS_Facet,
+        EAS_ForewardDepth,
+        EAS_LightFace,
+        EAS_LightHarsh1,
+        EAS_LightHarsh2,
+        EAS_LightLevel1,
+        EAS_LightLevel2,
+        EAS_LightDirection1,
+        EAS_LightDirection2,
+        EAS_Metal,
+        EAS_Plane,
+        EAS_RenderMode,
+        EAS_AngleX,
+        EAS_AngleY,
+        EAS_RotationCenterX,
+        EAS_RotationCenterY,
+        EAS_RotationCenterZ,
+        EAS_Shininess,
+        EAS_Skew,
+        EAS_SkewAngle,
+        EAS_Specularity,
+        EAS_Parallel,
+        EAS_ViewPoint,
+        EAS_OriginX,
+        EAS_OriginY,
+        EAS_Color,
+        EAS_Switched,
+        EAS_Polar,
+        EAS_RangeXMinimum,
+        EAS_RangeXMaximum,
+        EAS_RangeYMinimum,
+        EAS_RangeYMaximum,
+        EAS_RadiusRangeMinimum,
+        EAS_RadiusRangeMaximum,
+        EAS_Coordinates,
+        EAS_Segments,
+        EAS_StretchPoint,
+        EAS_TextFrames,
+        EAS_GluePoints,
+        EAS_GluePointLeavingDirections,
+        EAS_GluePointType,
+        EAS_FitPath,
+        EAS_FitShape,
+        EAS_ScaleX,
+        EAS_SameLetterHeights,
+        EAS_AccentBar,
+        EAS_Angle,
+        EAS_Distance,
+        EAS_Drop,
+        EAS_DropAuto,
+        EAS_Gap,
+        EAS_Length,
+        EAS_LengthSpecified,
+        EAS_FlipX,
+        EAS_FlipY,
+        EAS_TextBorder,
+        EAS_Type,
+        EAS_Position,
+        EAS_AdjustmentValues,
+
+        EAS_Last,
+        EAS_NotFound
+    };
+
+    EnhancedCustomShapeTokenEnum EASGet( const rtl::OUString& );
+    rtl::OUString EASGet( const EnhancedCustomShapeTokenEnum );
+}
+}
+
+#endif