Make building of cross-toolset build.pl and dmake free.

Adds more modules to Module_cross_*.mk.

Change-Id: I9a7a12ff07649262355bfa82bdf09fbf93b1530e
Reviewed-on: https://gerrit.libreoffice.org/2240Reviewed-by: Matúš Kukan <matus.kukan@gmail.com>
Tested-by: Matúš Kukan <matus.kukan@gmail.com>

Makefile.cross

+# -*- Mode: makefile-gmake; tab-width: 4; indent-tabs-mode: t -*-
+#
+# This file is part of the LibreOffice project.
+#
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0. If a copy of the MPL was not distributed with this
+# file, You can obtain one at http://mozilla.org/MPL/2.0/.
+#
+
+include $(dir $(realpath $(firstword $(MAKEFILE_LIST))))config_build.mk
+
+gb_Side := build
+include $(SOLARENV)/gbuild/gbuild.mk
+
+$(eval $(call gb_Module_make_global_targets,$(SRCDIR)/Module_cross_tail_build.mk))
+
+# vim: set noet sw=4 ts=4:

Makefile.in

@@ -46,7 +46,7 @@ else # MAKE_RESTARTS
 all: build
 
 ifeq ($(gb_Side),)
-export gb_Side:=host
+gb_Side:=host
 endif
 
 include $(BUILDDIR)/config_$(gb_Side).mk
@@ -291,13 +291,11 @@ endif
 build-nocheck : export SKIP_TESTS := YES
 build-nocheck : build
 
+# Ideally solenv would be also in Module_cross_toolset.mk
+# but one would need to chase and add missing dependencies.
 cross-toolset: bootstrap fetch
-# We need to build icu for the build platform, as building icu for the host
-# platform requires tools built as part of icu that can run on the build
-# platform. see --with-cross-build in icu/ExternalProject_icu.mk
-	$(GNUMAKE) gb_Side=build icu
-#
-	cd cross_tail_build && $(GNUMAKE) -j $(PARALLELISM) $(GMAKE_OPTIONS)
+	$(GNUMAKE) gb_Side=build solenv
+	$(GNUMAKE) -j $(PARALLELISM) $(GMAKE_OPTIONS) -f $(SRCDIR)/Makefile.cross
 
 #
 # Install

Module_cross_tail_build.mk → Module_cross_toolset.mk

@@ -25,9 +25,9 @@
 # in which case the provisions of the GPLv3+ or the LGPLv3+ are applicable
 # instead of those above.
 
-$(eval $(call gb_Module_Module,cross_tail_build))
+$(eval $(call gb_Module_Module,cross_toolset))
 
-$(eval $(call gb_Module_add_moduledirs,cross_tail_build,\
+$(eval $(call gb_Module_add_moduledirs,cross_toolset,\
 	autodoc \
 	basegfx \
 	binaryurp \
@@ -38,7 +38,7 @@ $(eval $(call gb_Module_add_moduledirs,cross_tail_build,\
 	cosv \
 	cppu \
 	cppuhelper \
-	cppunit \
+	external \
 	i18npool \
 	i18nutil \
 	idl \
@@ -62,6 +62,7 @@ $(eval $(call gb_Module_add_moduledirs,cross_tail_build,\
 	sax \
 	setup_native \
 	shell \
+	soltools \
 	stoc \
 	store \
 	tools \
@@ -75,12 +76,16 @@ $(eval $(call gb_Module_add_moduledirs,cross_tail_build,\
 	xmlreader \
 	$(call gb_Helper_optional,BOOST,boost) \
 	$(call gb_Helper_optional,CLUCENE,clucene) \
+	$(call gb_Helper_optional,CPPUNIT,cppunit) \
 	$(call gb_Helper_optional_for_host,DESKTOP, \
 		helpcompiler \
 		xmlhelp \
 	) \
 	$(call gb_Helper_optional,EXPAT,expat) \
+	$(call gb_Helper_optional,ICU,icu) \
 	$(call gb_Helper_optional,LIBLANGTAG,liblangtag) \
+	$(call gb_Helper_optional,LIBXML2,libxml2) \
+	$(call gb_Helper_optional,LIBXSLT,libxslt) \
 	$(call gb_Helper_optional,QADEVOOO,qadevOOo) \
 	$(call gb_Helper_optional,UCPP,ucpp) \
 	$(call gb_Helper_optional,ZLIB,zlib) \

Module_tail_build.mk

@@ -113,9 +113,9 @@ $(eval $(call gb_Module_add_moduledirs,tail_build,\
 	$(call gb_Helper_optional,WPD,libwpd) \
 	$(call gb_Helper_optional,WPG,libwpg) \
 	$(call gb_Helper_optional,WPS,libwps) \
+	$(call gb_Helper_optional,LIBXML2,libxml2) \
 	libxmlsec \
 	$(call gb_Helper_optional,LIBXSLT,libxslt) \
-	$(call gb_Helper_optional,LIBXML2,libxml2) \
 	lingucomponent \
 	linguistic \
 	lotuswordpro \

cross_tail_build/Makefile

-# -*- Mode: makefile-gmake; tab-width: 4; indent-tabs-mode: t -*-
-#*************************************************************************
-#
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-# 
-# Copyright 2000, 2010 Oracle and/or its affiliates.
-#
-# OpenOffice.org - a multi-platform office productivity suite
-#
-# This file is part of OpenOffice.org.
-#
-# OpenOffice.org is free software: you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License version 3
-# only, as published by the Free Software Foundation.
-#
-# OpenOffice.org is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU Lesser General Public License version 3 for more details
-# (a copy is included in the LICENSE file that accompanied this code).
-#
-# You should have received a copy of the GNU Lesser General Public License
-# version 3 along with OpenOffice.org.  If not, see
-# <http://www.openoffice.org/license.html>
-# for a copy of the LGPLv3 License.
-#
-#*************************************************************************
-
-include $(dir $(realpath $(firstword $(MAKEFILE_LIST))))/../config_build.mk
-
-export gb_Side=build
-
-include $(SOLARENV)/gbuild/gbuild.mk
-
-$(eval $(call gb_Module_make_global_targets,$(SRCDIR)/Module_cross_tail_build.mk))
-
-# vim: set noet sw=4 ts=4:

cross_tail_build/README

-This is "tail build" for the build side of cross-compilation
-
-See [git:tail_build/README] for details what it is good for and how to
-add a module to it.

cross_tail_build/prj/build.lst

-ctb	cross_tail_build	::	CPPUNIT:cppunit EXPAT:expat external ICU:icu LIBXML2:libxml2 LIBXSLT:libxslt solenv soltools NULL
-ctb tail_build\prj nmake - all ctb_prj   NULL