remove unhandled SID commands in starmath

checked that none of these are present in any .xcu files.

Change-Id: Ife5ac45ca4e71fed9515941c20853b9ab811e057
Reviewed-on: https://gerrit.libreoffice.org/35619Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
Tested-by: Noel Grandin <noel.grandin@collabora.co.uk>

bin/find-unused-defines-in-hrc-files.py

@@ -134,7 +134,10 @@ with a.stdout as txt:
             for line2 in txt2:
                 line2 = line2.strip() # otherwise the comparisons below will not work
                 # check if we found one in actual code
-                if not ".hrc:" in line2 and not ".src:" in line2: found_reason_to_exclude = True
+                if idName.startswith("SID_"):
+                    if not ".hrc:" in line2 and not ".src:" in line2 and not ".sdi:" in line2: found_reason_to_exclude = True
+                else:
+                    if not ".hrc:" in line2 and not ".src:" in line2: found_reason_to_exclude = True
                 if idName.startswith("RID_"):
                         # is the constant being used as an identifier by entries in .src files?
                         if ".src:" in line2 and "Identifier = " in line2: found_reason_to_exclude = True
@@ -163,9 +166,9 @@ with a.stdout as txt:
                 if "forms/" in line2 and idName.startswith("PROPERTY_"): found_reason_to_exclude = True
                 if "svx/source/tbxctrls/extrusioncontrols.hrc:" in line2 and idName.startswith("DIRECTION_"): found_reason_to_exclude = True
                 if "svx/source/tbxctrls/extrusioncontrols.hrc:" in line2 and idName.startswith("FROM_"): found_reason_to_exclude = True
-                # if we see more than 2 lines then it's probably one of the BASE/START/BEGIN things
-                cnt = cnt + 2
-                if cnt > 3: found_reason_to_exclude = True
+                # if we see more than a few lines then it's probably one of the BASE/START/BEGIN things
+                cnt = cnt + 1
+                if cnt > 4: found_reason_to_exclude = True
         if not found_reason_to_exclude:
             sys.stdout.write(idName + '\n')
             # otherwise the previous line of output will be incorrectly mixed into the below git output, because of buffering

starmath/inc/starmath.hrc

@@ -34,7 +34,6 @@
 #define SID_ZOOMIN                  (SID_SMA_START + 10)
 #define SID_ZOOMOUT                 (SID_SMA_START + 11)
 #define SID_DRAW                    (SID_SMA_START + 12)
-#define SID_TOOLBOX                 (SID_SMA_START + 14)
 #define SID_FORMULACURSOR           (SID_SMA_START + 15)
 #define SID_FONT                    (SID_SMA_START + 50)
 #define SID_FONTSIZE                (SID_SMA_START + 51)
@@ -71,7 +70,6 @@
 
 #define SID_GETEDITTEXT             (SID_SMA_START + 121)
 #define SID_CMDBOXWINDOW            (SID_SMA_START + 122)
-#define SID_TOOLBOXWINDOW           (SID_SMA_START + 123)
 #define SID_NO_RIGHT_SPACES         (SID_SMA_START + 124)
 #define SID_SAVE_ONLY_USED_SYMBOLS  (SID_SMA_START + 125)
 #define SID_ELEMENTSDOCKINGWINDOW   (SID_SMA_START + 126)

starmath/sdi/smath.sdi

@@ -600,43 +600,6 @@ SfxVoidItem UnicodeNotationToggle SID_UNICODE_NOTATION_TOGGLE
 ]
 
 
-SfxVoidItem ToolBoxWindow SID_TOOLBOXWINDOW
-()
-[
-    AutoUpdate = FALSE,
-    FastCall = FALSE,
-    ReadOnlyDoc = FALSE,
-    Toggle = FALSE,
-    Container = FALSE,
-    RecordAbsolute = FALSE,
-    RecordPerSet;
-
-    AccelConfig = FALSE,
-    MenuConfig = FALSE,
-    ToolBoxConfig = FALSE,
-    GroupId = GID_VIEW;
-]
-
-
-SfxBoolItem ToolBox SID_TOOLBOX
-
-[
-    AutoUpdate = FALSE,
-    FastCall = FALSE,
-    ReadOnlyDoc = FALSE,
-    Toggle = FALSE,
-    Container = FALSE,
-    RecordAbsolute = FALSE,
-    RecordPerSet;
-
-
-    AccelConfig = TRUE,
-    MenuConfig = TRUE,
-    ToolBoxConfig = TRUE,
-    GroupId = GID_VIEW;
-]
-
-
 SfxVoidItem ZoomIn SID_ZOOMIN
 ()
 [

starmath/sdi/smslots.sdi

@@ -283,22 +283,11 @@ interface FormulaView
     [
         ExecMethod = Execute;
     ]
-    //idlpp kein Menueeintrag , also keine Texte
-    SID_TOOLBOXWINDOW //idlpp ole : no , status : no
+    SID_SYMBOLS_CATALOGUE //idlpp ole : no , status : no
     [
-        ExecMethod = NoExec ;
-        StateMethod = NoState ;
+        ExecMethod = Execute ;
+        StateMethod = GetState ;
     ]
-        SID_TOOLBOX //idlpp ole : no , status : no
-        [
-                ExecMethod = Execute ;
-                StateMethod = GetState ;
-        ]
-        SID_SYMBOLS_CATALOGUE //idlpp ole : no , status : no
-        [
-                ExecMethod = Execute ;
-                StateMethod = GetState ;
-        ]
 }
 
 shell SmViewShell