Skip to content

C
core
Kaydet (Commit) eca8386c authored tarafından Caolán McNamara's avatar Caolán McNamara
Dosyalara gözat
Seçenekler

Prop_pSegmentInfo is totally misunderstood apparently 

digging into the crash on export of kde216114-1.odt
reveals various horrors

Change-Id: I0d24fe303d561a00a08098b306d10fd8273af928
(cherry picked from commit b04e1e79)
üst c0d691b9
Hide whitespace changes
Inline Side-by-side
Showing with 136 additions and 93 deletions
filter/source/msfilter/escherex.cxx
Dosyayı görüntüle @ eca8386c
......@@ -3258,85 +3258,92 @@ void EscherPropertyContainer::CreateCustomShapeProperties( const MSO_SPT eShapeT
.WriteUInt16( nElementSize );
for ( j = 0; j < nElements; j++ )
{
// The segment type is stored in the upper 3 bits
// and segment count is stored in the lower 13
// bits.
//
// If the segment type is msopathEscape, the lower 13 bits
// are divided in a 5 bit escape code and 8 bit
// vertex count (not segment count!)
sal_uInt16 nVal = (sal_uInt16)aSegments[ j ].Count;
switch( aSegments[ j ].Command )
{
case com::sun::star::drawing::EnhancedCustomShapeSegmentCommand::UNKNOWN :
case com::sun::star::drawing::EnhancedCustomShapeSegmentCommand::LINETO : break;
case com::sun::star::drawing::EnhancedCustomShapeSegmentCommand::MOVETO :
{
nVal = 0x4000;
}
break;
case css::drawing::EnhancedCustomShapeSegmentCommand::UNKNOWN :
case css::drawing::EnhancedCustomShapeSegmentCommand::LINETO :
break;
case css::drawing::EnhancedCustomShapeSegmentCommand::MOVETO :
nVal = (msopathMoveTo << 13);
break;
case com::sun::star::drawing::EnhancedCustomShapeSegmentCommand::CURVETO :
{
nVal |= 0x2000;
nVal |= (msopathCurveTo << 13);
}
break;
case com::sun::star::drawing::EnhancedCustomShapeSegmentCommand::CLOSESUBPATH :
{
nVal = 0x6001;
nVal = 1;
nVal |= (msopathClose << 13);
}
break;
case com::sun::star::drawing::EnhancedCustomShapeSegmentCommand::ENDSUBPATH :
{
nVal = 0x8000;
nVal = (msopathEnd << 13);
}
break;
case com::sun::star::drawing::EnhancedCustomShapeSegmentCommand::NOFILL :
{
nVal = 0xaa00;
nVal = (msopathEscape << 13) | (5 << 8);
}
break;
case com::sun::star::drawing::EnhancedCustomShapeSegmentCommand::NOSTROKE :
{
nVal = 0xab00;
nVal = (msopathEscape << 13) | (11 << 8);
}
break;
case com::sun::star::drawing::EnhancedCustomShapeSegmentCommand::ANGLEELLIPSETO :
{
nVal *= 3;
nVal |= 0xa100;
nVal |= (msopathEscape << 13) | (1 << 8);
}
break;
case com::sun::star::drawing::EnhancedCustomShapeSegmentCommand::ANGLEELLIPSE :
{
nVal *= 3;
nVal |= 0xa200;
nVal |= (msopathEscape << 13) | (2 << 8);
}
break;
case com::sun::star::drawing::EnhancedCustomShapeSegmentCommand::ARCTO :
{
nVal <<= 2;
nVal |= 0xa300;
nVal |= (msopathEscape << 13) | (3 << 8);
}
break;
case com::sun::star::drawing::EnhancedCustomShapeSegmentCommand::ARC :
{
nVal <<= 2;
nVal |= 0xa400;
nVal |= (msopathEscape << 13) | (4 << 8);
}
break;
case com::sun::star::drawing::EnhancedCustomShapeSegmentCommand::CLOCKWISEARCTO :
{
nVal <<= 2;
nVal |= 0xa500;
nVal |= (msopathEscape << 13) | (5 << 8);
}
break;
case com::sun::star::drawing::EnhancedCustomShapeSegmentCommand::CLOCKWISEARC :
{
nVal <<= 2;
nVal |= 0xa600;
nVal |= (msopathEscape << 13) | (6 << 8);
}
break;
case com::sun::star::drawing::EnhancedCustomShapeSegmentCommand::ELLIPTICALQUADRANTX :
{
nVal |= 0xa700;
nVal |= (msopathEscape << 13) | (7 << 8);
}
break;
case com::sun::star::drawing::EnhancedCustomShapeSegmentCommand::ELLIPTICALQUADRANTY :
{
nVal |= 0xa800;
nVal |= (msopathEscape << 13) | (8 << 8);
}
break;
}
......
include/filter/msfilter/escherex.hxx
Dosyayı görüntüle @ eca8386c
......@@ -424,6 +424,18 @@ enum ESCHER_LineCap
ESCHER_LineEndCapFlat // Line ends at end point
};
enum MSOPATHTYPE
{
msopathLineTo, // Draw a straight line (one point)
msopathCurveTo, // Draw a cubic Bezier curve (three points)
msopathMoveTo, // Move to a new point (one point)
msopathClose, // Close a sub - path (no points)
msopathEnd, // End a path (no points)
msopathEscape, // Escape code
msopathClientEscape, // Escape code interpreted by the client
msopathInvalid // Invalid - should never be found
};
// Shape Properties
// 1pt = 12700 EMU (English Metric Units)
// 1pt = 20 Twip = 20/1440" = 1/72"
......
oox/source/export/vmlexport.cxx
Dosyayı görüntüle @ eca8386c
......@@ -474,27 +474,56 @@ void VMLExport::Commit( EscherPropertyContainer& rProps, const Rectangle& rRect
for ( ; nSegments; --nSegments )
{
sal_uInt16 nSeg = impl_GetUInt16( pSegmentIt );
switch ( nSeg )
// The segment type is stored in the upper 3 bits
// and segment count is stored in the lower 13
// bits.
unsigned char nSegmentType = (nSeg & 0xE000) >> 13;
unsigned short nSegmentCount = nSeg & 0x03FF;
switch (nSegmentType)
{
case 0x4000: // moveto
case msopathMoveTo:
{
sal_Int32 nX = impl_GetPointComponent( pVerticesIt, nPointSize );
sal_Int32 nY = impl_GetPointComponent( pVerticesIt, nPointSize );
if (nX >= 0 && nY >= 0 )
aPath.append( "m" ).append( nX ).append( "," ).append( nY );
break;
}
case msopathClientEscape:
break;
case msopathEscape:
{
// If the segment type is msopathEscape, the lower 13 bits are
// divided in a 5 bit escape code and 8 bit
// vertex count (not segment count!)
unsigned char nEscapeCode = (nSegmentCount & 0x1F00) >> 8;
unsigned char nVertexCount = nSegmentCount & 0x00FF;
pVerticesIt += nVertexCount;
switch (nEscapeCode)
{
sal_Int32 nX = impl_GetPointComponent( pVerticesIt, nPointSize );
sal_Int32 nY = impl_GetPointComponent( pVerticesIt, nPointSize );
if (nX >= 0 && nY >= 0 )
aPath.append( "m" ).append( nX ).append( "," ).append( nY );
case 0xa: // nofill
aPath.append( "nf" );
break;
case 0xb: // nostroke
aPath.append( "ns" );
break;
}
break;
case 0xb300:
case 0xac00:
break;
case 0x0001: // lineto
}
case msopathLineTo:
for (unsigned short i = 0; i < nSegmentCount; ++i)
{
sal_Int32 nX = impl_GetPointComponent( pVerticesIt, nPointSize );
sal_Int32 nY = impl_GetPointComponent( pVerticesIt, nPointSize );
aPath.append( "l" ).append( nX ).append( "," ).append( nY );
}
break;
case 0x2001: // curveto
case msopathCurveTo:
for (unsigned short i = 0; i < nSegmentCount; ++i)
{
sal_Int32 nX1 = impl_GetPointComponent( pVerticesIt, nPointSize );
sal_Int32 nY1 = impl_GetPointComponent( pVerticesIt, nPointSize );
......@@ -507,35 +536,17 @@ void VMLExport::Commit( EscherPropertyContainer& rProps, const Rectangle& rRect
.append( nX3 ).append( "," ).append( nY3 );
}
break;
case 0xaa00: // nofill
aPath.append( "nf" );
break;
case 0xab00: // nostroke
aPath.append( "ns" );
break;
case 0x6001: // close
case msopathClose:
aPath.append( "x" );
break;
case 0x8000: // end
case msopathEnd:
aPath.append( "e" );
break;
default:
// See EscherPropertyContainer::CreateCustomShapeProperties, by default nSeg is simply the number of points.
// FIXME: we miss out a significant amount of complexity from
// the above method here, and do some rather odd things to match.
int nElems = !nPointSize ? 0 : aVertices.nPropSize / (nPointSize * 2);
if (nSeg > nElems)
{
SAL_WARN("oox", "Busted escher export " << nSeg << "vs . " << nElems << " truncating point stream");
nSeg = nElems;
}
for (int i = 0; i < nSeg; ++i)
{
sal_Int32 nX = impl_GetPointComponent(pVerticesIt, nPointSize);
sal_Int32 nY = impl_GetPointComponent(pVerticesIt, nPointSize);
if (nX >= 0 && nY >= 0 )
aPath.append("l").append(nX).append(",").append(nY);
}
SAL_WARN("oox", "Totally b0rked\n");
break;
case msopathInvalid:
SAL_WARN("oox", "Invalid - should never be found");
break;
}
}
......
sw/qa/extras/ooxmlexport/ooxmlexport5.cxx
Dosyayı görüntüle @ eca8386c
......@@ -837,11 +837,11 @@ DECLARE_OOXMLEXPORT_TEST(testKDE302504, "kde302504-1.odt")
assertXPath(pXmlDoc, "//v:shape", "ID", "KoPathShape");
}
//DECLARE_OOXMLEXPORT_TEST(testKDE216114, "kde216114-1.odt")
//{
// if (xmlDocPtr pXmlDoc = parseExport("word/document.xml"))
// assertXPath(pXmlDoc, "//w:pict", 1);
//}
DECLARE_OOXMLEXPORT_TEST(testKDE216114, "kde216114-1.odt")
{
if (xmlDocPtr pXmlDoc = parseExport("word/document.xml"))
assertXPath(pXmlDoc, "//w:pict", 1);
}
CPPUNIT_PLUGIN_IMPLEMENT();
......
sw/source/filter/ww8/rtfsdrexport.cxx
Dosyayı görüntüle @ eca8386c
......@@ -278,48 +278,61 @@ void RtfSdrExport::Commit(EscherPropertyContainer& rProps, const Rectangle& rRec
for (; nSegments; --nSegments)
{
sal_uInt16 nSeg = impl_GetUInt16(pSegmentIt);
// The segment type is stored in the upper 3 bits
// and segment count is stored in the lower 13
// bits.
unsigned char nSegmentType = (nSeg & 0xE000) >> 13;
unsigned short nSegmentCount = nSeg & 0x03FF;
aSegmentInfo.append(';').append((sal_Int32)nSeg);
switch (nSeg)
{
case 0x0001: // lineto
case 0x4000: // moveto
{
sal_Int32 nX = impl_GetPointComponent(pVerticesIt, nVerticesPos, nPointSize);
sal_Int32 nY = impl_GetPointComponent(pVerticesIt, nVerticesPos, nPointSize);
aVerticies.append(";(").append(nX).append(",").append(nY).append(")");
nVertices ++;
}
break;
case 0x2001: // curveto
switch (nSegmentType)
{
for (int i = 0; i < 3; i++)
case msopathLineTo:
for (unsigned short i = 0; i < nSegmentCount; ++i)
{
sal_Int32 nX = impl_GetPointComponent(pVerticesIt, nVerticesPos, nPointSize);
sal_Int32 nY = impl_GetPointComponent(pVerticesIt, nVerticesPos, nPointSize);
aVerticies.append(";(").append(nX).append(",").append(nY).append(")");
nVertices ++;
}
break;
case msopathMoveTo:
{
sal_Int32 nX = impl_GetPointComponent(pVerticesIt, nVerticesPos, nPointSize);
sal_Int32 nY = impl_GetPointComponent(pVerticesIt, nVerticesPos, nPointSize);
aVerticies.append(";(").append(nX).append(",").append(nY).append(")");
nVertices ++;
nVertices++;
break;
}
}
break;
case 0xb300:
case 0xac00:
case 0xaa00: // nofill
case 0xab00: // nostroke
case 0x6001: // close
case 0x8000: // end
break;
default:
// See EscherPropertyContainer::CreateCustomShapeProperties, by default nSeg is simply the number of points.
for (int i = 0; i < nSeg; ++i)
case msopathCurveTo:
for (unsigned short j = 0; j < nSegmentCount; ++j)
{
for (int i = 0; i < 3; i++)
{
sal_Int32 nX = impl_GetPointComponent(pVerticesIt, nVerticesPos, nPointSize);
sal_Int32 nY = impl_GetPointComponent(pVerticesIt, nVerticesPos, nPointSize);
aVerticies.append(";(").append(nX).append(",").append(nY).append(")");
nVertices ++;
}
}
break;
case msopathEscape:
{
if (nVerticesPos >= aVertices.nPropSize)
break;
sal_Int32 nX = impl_GetPointComponent(pVerticesIt, nVerticesPos, nPointSize);
sal_Int32 nY = impl_GetPointComponent(pVerticesIt, nVerticesPos, nPointSize);
aVerticies.append(";(").append(nX).append(",").append(nY).append(")");
++nVertices;
// If the segment type is msopathEscape, the lower 13 bits are
// divided in a 5 bit escape code and 8 bit
// vertex count (not segment count!)
unsigned char nVertexCount = nSegmentCount & 0x00FF;
nVerticesPos += nVertexCount;
break;
}
break;
case msopathClientEscape:
case msopathClose:
case msopathEnd:
break;
default:
SAL_WARN("oox", "Totally b0rked\n");
break;
}
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment