Change-Id: Ia45446db1263b8969cf933e5d34130102605b3e9

Change-Id: I1ae06b7d9012e57ba66cca013bca47e5a9455b72

Change-Id: I01b968c4abe705b1694632377d4bf21fae1d9cd6

Change-Id: I86205aeeefd727090b780bc41a959200affa9920

Change-Id: I1bd921c55223671d3474c882b059b46fb87fd694

Change-Id: I89d226a8442558fbdff84de2115fa013c1690239

Change-Id: Ifa60bb0fc3cfde40a9a01478cfacf3ba2baba2b9

Change-Id: I4798f3575aa90f06c9458ae89d94f72312cf53ab

Change-Id: I686341c79e77f16c6a4cd81cf9fedcd25c4e4996

This commit removes @author annotations, some templates comments. It has some
cleanup.

Change-Id: I995ba7b06d661fcec17f26c368d9449c0bf5ab45
Signed-off-by: José Guilherme Vanz <guilherme.sft@gmail.com>
Reviewed-on: https://gerrit.libreoffice.org/1146Reviewed-by: Norbert Thiebaud <nthiebaud@gmail.com>
Tested-by: Norbert Thiebaud <nthiebaud@gmail.com>

Change-Id: Ifafd8b2ffd9af90b6ac4ed2ee0ccd3c5e980731c

Conflicts:
	sw/source/ui/misc/insrule.cxx

Currently there are 4 different debug options:
--enable-dbgutil (the recommended one)
--enable-debug
--enable-selective-debuginfo
--enable-symbols (for advanced users only)

In this table the properties of each option is shown:
----------------------------------------
options\properties | O | S | D | T | U |
----------------------------------------
production-code    | x | - | - | - | - |
----------------------------------------
--enable-symbols   | x | x | - | - | - |
----------------------------------------
--enable-debug     | - | x | x | x | - |
----------------------------------------
--enable-dbgutil   | - | x | x | x | x |
----------------------------------------

where
O: optimization
S: debug symbols
D: debug STL
T: trace facility
U: additional debug utility (object counting)

Note:
--enable-selective-debuginfo has the same properties as --enable-debug

Change-Id: Ib8a28c6162f47526d6bb33f81f53835cd11894b2

Change-Id: I77b3afa52bd5cc25a6385cbdb480a30e7aef387c

Change-Id: I2ceaa3159e8669c2c569fa8559c1e061dcad399d

Change-Id: Ib5ec2902a0642a25462e1e296087804dffbb04ce

Change-Id: I6413fa7b9a7ca5e5f88c634ac4a7092162a9a9c9

Change-Id: Ie55dfd19f223df62c091ffc4fdf28789b308a1c7

Change-Id: I51cc07d45bd285a5e6806467d10ce758189d0de6
Reviewed-on: https://gerrit.libreoffice.org/1051Reviewed-by: Michael Meeks <michael.meeks@suse.com>
Tested-by: Michael Meeks <michael.meeks@suse.com>

Project: dictionaries  3938d334ff4ce612a01b8cc178b0e79782577a62
fdo#57461 fix Lightproof/Hunspell synchronization

Change-Id: Ia8b469ccbb2d41c70429c725708bc853edcdd537

Using a distance to click to select the best object to select between
normal text and background object.

Change-Id: Ib5b53161c7af2c16f4df379382f2e53fc6d8092b

Change-Id: Ie36ba37d521b4a73455488cee61ef55a6fcc9c0f

Now, double-click actually selects a frame anchored in header/footer.
Code has been cleaned a bit as well.

Change-Id: Idb7f3520527a0cb6efe0ea41c62f452bc87c4e8d

The main problem here was due to the click to show the separator when
there is no header or footer under the frame. That code was just exiting
MouseButtonDown too early, which isn't good.

Moved the seperators showing code out of the SwCrsrShell as it has no
clue about the document-position and may lead to problems.

Change-Id: Ia62333b52c5d0659bbe7ec4fcfe6e664db132435

Change-Id: Ic3a424b5ac8c2168747bc7253f421bf5367beac7

Change-Id: I1c5e2440e0d3c520221cc19bf2d6152970e156c1

This pushes down import time of
http://people.freedesktop.org/~vmiklos/2012/footnote-10k.rtf.xz from
10sec to 5sec on my machine.

Change-Id: I39b7e4ea59fb5c05c1d3940920950ebc47adb48b

Change-Id: Iab898ad984203e32df72f5ed643e3846a92548ee

Change-Id: I82a68d8453b9053ac08e85e02fa011fcae852ca0

Change-Id: Iea2da3947a76e45fb323abed3b9a14ccc3fdfbdc

Change-Id: Ice698827b3bc559a1e5ad0ea929145fa8c0dfffe

Change-Id: Id460ed774b4ccedd5e72ba41756fc7c78f8c2313

Change-Id: Idd31818e2fca33951bceb6e4b64fa57b43f8e7be

Change-Id: I463fd97de5106da44326db77e7f9589926f71b20

Change-Id: I8b889402345bd86c4a9ced62a22ad4137c673693

Change-Id: Ia654664700b0b9262a5803d2976c22b61e44e758

Change-Id: I3f815bc7e825728421d5d87832f9a5ad1bcb53cc

...as there are typically no direct calls to it anyway.  What is apparently
needed is to decorate the cppumaker-generated headers instead:

* cppumaker obtains deprecation-information from the documentation strings in
  .rdb files.  As these are normally generated by idlc without documentation
  included (no -C), idlc got changed to nevertheless contain documentation
  consisting of just "@deprecated" in this case, to allow to easily tunnel this
  information to cppumaker always.

* The mechanism of parsing for "@deprecated" in documentation strings is
  somewhat crude, of course.

* For now, cppumaker only decorates C++ functions that correspond to UNOIDL
  interface attributes and methods.  More should be possible (but, e.g., being
  able to decorate a complete C++ class corresponding to a deprecated UNOIDL
  interface type depends on whether all platforms would accept
  SAL_DEPRECATED_INTERNAL at the same position in a C++ class declaration.

* This could also be extended to other languages than C++/cppumaker.

* Always using SAL_DEPRECATED_INERNAL instead of SAL_DEPRECATED for decoration
  is to keep things simple and our codebase working.  Improvements are possible
  here, too, of course.

Change-Id: Ia2917892f780d477652e4cd9f286588a6898c3f5

...as it will do in one of the following commits.

Change-Id: Ic13c0d398943d34dffbc1a87efcac213d6699ca9

...as it will do in one of the following commits.

Change-Id: Ie243504db965e3a4803c593b9c09f12d2cb0fcfc